home *** CD-ROM | disk | FTP | other *** search
- Path: news.icon-stl.net!usenet
- From: wmaddock@icon-stl.net (William F. Maddock)
- Newsgroups: comp.sys.amiga.applications
- Subject: Re: Final Writer Outline Mode
- Date: 25 Feb 1996 03:55:09 GMT
- Organization: iCON, a service of St. Louis Internet Connections
- Message-ID: <1288.6628T1232T380@icon-stl.net>
- References: <4gahh0$2j1@phnx2.phnx.uswest.net>
- NNTP-Posting-Host: dialup-104.icon-stl.net
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
-
- On 20-Feb-96 00:02:56 ric@softwood.com Ric Fischer wrote:
-
- >Then again, if you don't have the manual, I could certainly understand
- >your confusion.
-
- Speaking of the manual, I have a couple of suggestions:
-
- 1 If Softwood were to add support for the Adobe Standard
- Roman Character Set, they could use their own software
- to do the manual. Definitely a strong advertising point.
- This need not go beyond the capability to use all 250 or
- so characters normally already present in postscript fonts.
- Currently, this can not be done because they stubbornly
- cling to the Amiga Character Set, which is terribly lacking
- in several areas. Proper typographic quotation marks is just
- one example.
-
- 2 Failing that, since Softwood is *primarily* an Amiga
- software house, it would be good if they would at least
- use an Amiga product to create the manual.
-
- >- Ric Fischer
- >- SoftWood Tech Support
- >- email: ric@softwood.com IRC: Lighty
-
-
-
- The opinions expressed are not necessarily
- those of the Gateway Amiga Club,Inc. or its members.
- William F. Maddock Editor in Chief GAC FLAK wmaddock@icon-stl.net
- The Newsletter of the Gateway Amiga Club, Inc. www.icon-stl.net/~wmaddock
-
-